Instructions

Operational Modes and Instructions

This guide will overview the menu system and options available to Chilldex 2.0 and 2.0 PRO users.

All the great feedback over the last year has resulted in many new and well needed features to the Chilldex functionality!

Slide SPEED 0 1 2 3 4 5 6 7 8 9 10 9 8 7 6 5 4 3 2 1 0 STATUS Press on the top and bottom buttons to increase or decrease speed MANUAL MODE

In Manual mode, There are ten speed settings to choose from. The TOP led provides the status and will light up to show you if you have increased or decreased speed level.

The mode and fan speed settings are saved in the case of power off or unplugging the Index

Slide MANUAL MODE MANUAL TEMPSENSE STATUS Hold both buttons to enter Temp Sense mode, Hold the bottom button for 4 seconds to exit. MODE SWITCH

To Switch to Temperature Sense Mode, Hold both buttons for up to one second. The TOP led will stay lit to indicate this mode.  The fans may spin up to max upon entering this mode.  Fans will generally slow to zero over the course of two minutes if idle. To return to Manual mode, Hold the bottom button for up to four seconds.

The mode and curve settings are saved in the case of power off or unplugging the Index

Slide TEMPSENSE 1 2
MODE TEMPSENSE TEMPCURVE
STATUS In TempSense mode, Hold top button for 10 seconds to enter FanCurve mode. The top Led will blink the curve setting number.
Hold the bottom button for 4 seconds to exit.
TEMP CURVES

To modify the TempCurve profile, make sure you are in TempSense mode. (as indicated by the top led being lit)  Hold the top Led for ten secconds. The top LED will begin to blink the number of times equal to the curve setting.  Two blinks in succession means profile #2. Five blinks in succession means profile #5. To cycle  profile numbers, press the top button.

 

To exit this mode, hold the bottom button for up to four seconds. 

Fan Curve Operation and Settings

Fan curve options are a way of tweaking the profile of the curve so that it operates better for your particular environment.

 


It is recommended to leave the settings at default unless you are experiencing issues.

Please forgive the unresponsiveness of the menu system at times. All the code that makes up the menu system, temperature curve profiles/control systems is less than 1/25th the filesize of one emoji character! 🤯

Default: This mode should work well for most users. If you have issues with the fan turning on randomly or not turning on soon enough se the other modes below.

Passive: This mode is for Chilldex 2.0 PRO users who find the fans too powerful or distracting at max strength, The fan operates at half speed which is still much faster than the original Chilldex.

Temp Shift 1: This mode shifts the auto start temp for those that have issues with the fans tripping too sensitively.  in warmer rooms/environments the Index will get hot (35+C) doing absolutely nothing!

A side effect is that the fans will auto start later into your play session.

Temp Shift 2: This mode shifts the auto start temp for those that have issues with the fans tripping too sensitively.  in warmer rooms/environments the Index will get hot (35+C) doing absolutely nothing!

A side effect is that the fans will auto start later into your play session.

Agressive: This mode start the autosensing temp earlier and keeps the fans on for longer making sure the system adapts quicker to the heat in the headset.

A side effect is that the Fans will be very sensitive to ambient temperature when the headset is idle/off.